Application of the discrete least squares method to measurements of chemical oxygen demand in tannery effluents
Fecha
2024-05-09Autor
Inca Balseca, Cristian Luis
Barrera Rea, María Gabriela
Coronel Maji, Franklin Marcelo
Magallanes Tomalá, Jorge Leonardo
Metadatos
Mostrar el registro completo del ítemResumen
The tanning process is the process of treatment and transformation of
animal skin into leather, where said process resides especially in the
addition to the skins of a series of tanning products such as chrome salts,
among others. In this sense, it can be said that, in the present investigation,
the physicochemical and microbiological behavior of the reactor was
studied during the leather process in the industries, which has been
increasing this activity in the behavior of the wastewater produced by the
producers. leather, taking into account that they need more efficient
systems for the treatment of effluents generated in this sector. This is how,
for the development of this research, a reactor was managed per load with
a useful volume of 2 liters that worked in aerobic circumstances with 24
hour cycles. Likewise, for the development of this investigation, it was
possible to progressively increase the concentration of the effluent from
the tannery, taking into account the DQO and the count of heterotrophic
microorganisms, which were the main variables studied during the
investigation. Finally, biodegradable DQO removals achieved at the end
of the acclimatization process were 57.9% for DQOt and 76.8% for DQOs,
also presenting little significant amount of heterotrophic bacteria in the
effluent. El proceso de curtido es el proceso de tratamiento y transformación de la
piel animal en cuero, donde dicho proceso reside especialmente en la
adición a las pieles de una serie de productos curtientes como las sales de
cromo, entre otros. En este sentido, se puede decir que, en la presente
investigación, se estudió el comportamiento fisicoquímico y
microbiológico del reactor durante el proceso del cuero en las industrias,
lo que ha ido incrementando esta actividad en el comportamiento de las
aguas residuales producidas por los productores cuero, teniendo en cuenta
que necesitan sistemas más eficientes para el tratamiento de los efluentes
generados en este sector. Es así como para el desarrollo de esta
investigación se manejó un reactor por carga con un volumen útil de 2 litros
que trabajó en circunstancias aeróbicas con ciclos de 24 horas. Asimismo,
para el desarrollo de esta investigación se logró aumentar progresivamente
la concentración del efluente de la curtiduría, teniendo en cuenta el DQO
y el recuento de microorganismos heterótrofos, que fueron las principales
variables estudiadas durante la investigación. Finalmente, las remociones
de DQO biodegradables logradas al final del proceso de aclimatación
fueron del 57,9% para DQOt y del 76,8% para DQOs, presentando además
cantidades poco significativas de bacterias heterótrofas en el efluente.